RING TERMINAL | 22-16G, 1/4, Red (PIDG)

PIDG terminals and splices (Pre-Insulated Diamond Grip) are designed for complete and uniform reliability in the most difficult circuit environments.

PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of of a nylon or PVC insulated body, plus a metal sleeve which clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.

This ring terminal (EDMO# 31894) has red insulation, a 6.35 mm stud size, and used on 22 – 16 AWG wire. 

Features

• Nylon or PVC insulation, tin plating
• Copper insulation support sleeve
• Wire range: 26 AWG - 10 AWG (0.12 – 6.64 mm2)
• Operating Voltage: 300V
• Temperature Rating: standard 105°C max., PVF2 150°C max (also available with PTFE insulation and Nickel plating up to 288°C max)
• UL Listed, CSA certified
• Many PIDG terminals and splices are Military Approved: ASM7928

Benefits

• Vibration resistant; wire can bend any direction without damage
• Insulation repels hydrocarbons (greases, oils, etc.) and has high dielectric strength.
• Serrations in wire barrel give maximum electrical contact and tensile strength with the conductor
• Funneled wire entry prevents turned back wire strands and permits rapid wire insertion during high speed production
• Insulation sleeves and corresponding tooling are color-coded by wire size for easier identification
• “C” crimp specially designed by TE for rugged use